容差高度尺度属性 （ActiveX）

签名

工 务 局：

object.ToleranceHeightScale

对象

类型：暗三点角度，暗对齐，暗角，暗弧长度，暗直径，尺寸，暗坐标，暗径向，暗径向大，暗心旋转

此属性适用的对象。

属性值

只读：不

类型：双

容差值的比例因子。

言论

此属性的初始值为 1.0000。

仅当属性设置为除以下值以外的任何值时，此属性才可用。ToleranceDisplayacTolNone

当 DIMTOL 处于打开状态且 DIMTM 不等于 DIMTP 或 DIMLIM 处于打开状态时，将此属性用于加号和减号容差字符串。

例子

工 务 局：

Sub Example_ToleranceHeightScale()
    ' This example creates an aligned dimension in model space and
    ' turns on the tolerance display for the new dimension.  The height
    ' of the tolerance text can then be adjusted by the user

    Dim dimObj As AcadDimAligned
    Dim newText As AcadTextStyle
    Dim point1(0 To 2) As Double, point2(0 To 2) As Double
    Dim location(0 To 2) As Double
    Dim CurrentScale As Integer
    
    ' Define the dimension
    point1(0) = 5: point1(1) = 5: point1(2) = 0
    point2(0) = 5.5: point2(1) = 5: point2(2) = 0
    location(0) = 5: location(1) = 7: location(2) = 0
    
    ' Create an aligned dimension object in model space
    Set dimObj = ThisDrawing.ModelSpace.AddDimAligned(point1, point2, location)
    
    ' Turn on the tolerance display
    dimObj.ToleranceDisplay = acTolSymmetrical
    
    ThisDrawing.Application.ZoomAll
    
Increase:
    ' Read and display the current tolerance height scale for this dimension
    If MsgBox("The tolerance height scale is currently set to: " & dimObj.ToleranceHeightScale & vbCrLf & _
              "Press OK to increase, or cancel to finish", vbOKCancel) = vbCancel Then
        
        Exit Sub
    End If
    
    ' Increase the tolerance height scale for this dimension
    dimObj.ToleranceHeightScale = dimObj.ToleranceHeightScale + 1
    
    ThisDrawing.Regen acAllViewports
    
    GoTo Increase
End Sub

Visual LISP:

(vl-load-com)
(defun c:Example_ToleranceHeightScale()
    ;; This example creates an aligned dimension in model space and
    ;; turns on the tolerance display for the new dimension.  The height
    ;; of the tolerance text can then be adjusted by the user
    (setq acadObj (vlax-get-acad-object))
    (setq doc (vla-get-ActiveDocument acadObj))
    
    ;; Define the dimension
    (setq point1 (vlax-3d-point 5 5 0)
          point2 (vlax-3d-point 5.5 5 0)
          location (vlax-3d-point 5 7 0))
    
    ;; Create an aligned dimension object in model space
    (setq modelSpace (vla-get-ModelSpace doc))
    (setq dimObj (vla-AddDimAligned modelSpace point1 point2 location))
    
    ;; Turn on the tolerance display
    (vla-put-ToleranceDisplay dimObj acTolSymmetrical)
    
    (vla-ZoomAll acadObj)
    (vla-Regen doc acAllViewports)
    
    ;; Read and display the current tolerance height scale for this dimension
    (alert (strcat "The tolerance height scale is currently set to: " (rtos (vla-get-ToleranceHeightScale dimObj) 2)))
    
    ;; Increase the tolerance height scale for this dimension
    (vla-put-ToleranceHeightScale dimObj (1+ (vla-get-ToleranceHeightScale dimObj)))
    
    (vla-Regen doc acAllViewports)
    
    ;; Read and display the current tolerance height scale for this dimension
    (alert (strcat "The tolerance height scale is now set to: " (rtos (vla-get-ToleranceHeightScale dimObj) 2)))
)